2006 Jeep Cherokee vs. 2005 Toyota MR2

To start off, 2006 Jeep Cherokee is newer by 1 year(s). Which means there will be less support and parts availability for 2005 Toyota MR2. In addition, the cost of maintenance, including insurance, on 2005 Toyota MR2 would be higher. At 2,774 cc (4 cylinders), 2006 Jeep Cherokee is equipped with a bigger engine. In terms of performance, 2006 Jeep Cherokee (160 HP @ 3800 RPM) has 10 more horse power than 2005 Toyota MR2. (150 HP @ 6400 RPM). In normal driving conditions, 2006 Jeep Cherokee should accelerate faster than 2005 Toyota MR2. With that said, vehicle weight also plays an important factor in acceleration. 2006 Jeep Cherokee weights approximately 612 kg more than 2005 Toyota MR2. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2006 Jeep Cherokee is four wheel drive (4WD), it will have significant more traction and grip than 2005 Toyota MR2. In wet, icy, snow, or gravel driving conditions, 2006 Jeep Cherokee will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Jeep Cherokee (400 Nm @ 1800 RPM) has 230 more torque (in Nm) than 2005 Toyota MR2. (170 Nm @ 4400 RPM). This means 2006 Jeep Cherokee will have an easier job in driving up hills or pulling heavy equipment than 2005 Toyota MR2. 2006 Jeep Cherokee has automatic transmission and 2005 Toyota MR2 has manual transmission. 2005 Toyota MR2 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2006 Jeep Cherokee will be easier to drive especially in heavy traffic.

Compare all specifications:

2006 Jeep Cherokee 2005 Toyota MR2
Make Jeep Toyota
Model Cherokee MR2
Year Released 2006 2005
Body Type SUV Convertible
Engine Position Front Middle
Engine Size 2774 cc 1792 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 160 HP 150 HP
Engine RPM 3800 RPM 6400 RPM
Torque 400 Nm 170 Nm
Torque RPM 1800 RPM 4400 RPM
Engine Bore Size 94 mm 79 mm
Engine Stroke Size 100 mm 91.5 mm
Engine Compression Ratio 17.5:1 10.0:1
Fuel Type Diesel Gasoline - Premium
Acceleration 0-100mph 12.6 seconds 8 seconds
Drive Type 4WD Rear
Transmission Type Automatic Manual
Number of Seats 5 seats 2 seats
Number of Doors 5 doors 2 doors
Vehicle Weight 1677 kg 1065 kg
Vehicle Length 4510 mm 3900 mm
Vehicle Width 1830 mm 1700 mm
Vehicle Height 1820 mm 1250 mm
Wheelbase Size 2650 mm 2500 mm
Fuel Consumption Overall 10.9 L/100km 7.4 L/100km
Fuel Tank Capacity 78 L 48 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]