2006 Mercedes-Benz CL vs. 2010 Fiat Panda
To start off, 2010 Fiat Panda is newer by 4 year(s). Which means there will be less support and parts availability for 2006 Mercedes-Benz CL. In addition, the cost of maintenance, including insurance, on 2006 Mercedes-Benz CL would be higher. At 4,964 cc (8 cylinders), 2006 Mercedes-Benz CL is equipped with a bigger engine. In terms of performance, 2006 Mercedes-Benz CL (302 HP @ 5600 RPM) has 249 more horse power than 2010 Fiat Panda. (53 HP @ 5000 RPM). In normal driving conditions, 2006 Mercedes-Benz CL should accelerate faster than 2010 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 2006 Mercedes-Benz CL weights approximately 970 kg more than 2010 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2006 Mercedes-Benz CL is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2006 Mercedes-Benz CL. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Mercedes-Benz CL (460 Nm @ 2700 RPM) has 372 more torque (in Nm) than 2010 Fiat Panda. (88 Nm @ 2750 RPM). This means 2006 Mercedes-Benz CL will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Panda. 2006 Mercedes-Benz CL has automatic transmission and 2010 Fiat Panda has manual transmission. 2010 Fiat Panda will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2006 Mercedes-Benz CL will be easier to drive especially in heavy traffic.
Compare all specifications:
2006 Mercedes-Benz CL | 2010 Fiat Panda | |
Make | Mercedes-Benz | Fiat |
Model | CL | Panda |
Year Released | 2006 | 2010 |
Body Type | Coupe | Hatchback |
Engine Position | Front | Front |
Engine Size | 4964 cc | 1107 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 3 valves | 2 valves |
Horse Power | 302 HP | 53 HP |
Engine RPM | 5600 RPM | 5000 RPM |
Torque | 460 Nm | 88 Nm |
Torque RPM | 2700 RPM | 2750 RPM |
Engine Bore Size | 97 mm | 70 mm |
Engine Stroke Size | 84 mm | 72 mm |
Engine Compression Ratio | 10.0:1 | 9.6:1 |
Fuel Type | Gasoline - Premium | Gasoline - Premium |
Top Speed | 250 km/hour | 150 km/hour |
Acceleration 0-100mph | 6.3 seconds | 15 seconds |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1885 kg | 915 kg |
Vehicle Length | 5000 mm | 3540 mm |
Vehicle Width | 1860 mm | 1600 mm |
Vehicle Height | 1400 mm | 1550 mm |
Wheelbase Size | 2890 mm | 2310 mm |
Fuel Consumption Overall | 11.4 L/100km | 5.7 L/100km |
Fuel Tank Capacity | 88 L | 35 L |