2006 Mercedes-Benz CLS vs. 2010 Fiat Panda
To start off, 2010 Fiat Panda is newer by 4 year(s). Which means there will be less support and parts availability for 2006 Mercedes-Benz CLS. In addition, the cost of maintenance, including insurance, on 2006 Mercedes-Benz CLS would be higher. At 3,495 cc (6 cylinders), 2006 Mercedes-Benz CLS is equipped with a bigger engine. In terms of performance, 2006 Mercedes-Benz CLS (268 HP @ 6000 RPM) has 209 more horse power than 2010 Fiat Panda. (59 HP @ 5000 RPM). In normal driving conditions, 2006 Mercedes-Benz CLS should accelerate faster than 2010 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 2006 Mercedes-Benz CLS weights approximately 870 kg more than 2010 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2006 Mercedes-Benz CLS is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2006 Mercedes-Benz CLS. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Mercedes-Benz CLS (350 Nm @ 2400 RPM) has 248 more torque (in Nm) than 2010 Fiat Panda. (102 Nm @ 2500 RPM). This means 2006 Mercedes-Benz CLS will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Panda. 2006 Mercedes-Benz CLS has automatic transmission and 2010 Fiat Panda has manual transmission. 2010 Fiat Panda will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2006 Mercedes-Benz CLS will be easier to drive especially in heavy traffic.
Compare all specifications:
2006 Mercedes-Benz CLS | 2010 Fiat Panda | |
Make | Mercedes-Benz | Fiat |
Model | CLS | Panda |
Year Released | 2006 | 2010 |
Body Type | Sedan | Hatchback |
Engine Position | Front | Front |
Engine Size | 3495 cc | 1242 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 268 HP | 59 HP |
Engine RPM | 6000 RPM | 5000 RPM |
Torque | 350 Nm | 102 Nm |
Torque RPM | 2400 RPM | 2500 RPM |
Engine Compression Ratio | 10.7:1 | 9.8:1 |
Fuel Type | Gasoline | Gasoline |
Top Speed | 250 km/hour | 150 km/hour |
Acceleration 0-100mph | 7 seconds | 14 seconds |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 4 doors | 5 doors |
Vehicle Weight | 1730 kg | 860 kg |
Vehicle Length | 4920 mm | 3540 mm |
Vehicle Width | 1860 mm | 1580 mm |
Vehicle Height | 1410 mm | 1550 mm |
Wheelbase Size | 2720 mm | 2310 mm |
Fuel Consumption Overall | 10.3 L/100km | 5.6 L/100km |
Fuel Tank Capacity | 89 L | 35 L |