2006 Mini One vs. 2010 Mazda 3

To start off, 2010 Mazda 3 is newer by 4 year(s). Which means there will be less support and parts availability for 2006 Mini One. In addition, the cost of maintenance, including insurance, on 2006 Mini One would be higher. At 2,000 cc (4 cylinders), 2010 Mazda 3 is equipped with a bigger engine. In terms of performance, 2010 Mazda 3 (148 HP @ 6500 RPM) has 74 more horse power than 2006 Mini One. (74 HP @ 4000 RPM) In normal driving conditions, 2010 Mazda 3 should accelerate faster than 2006 Mini One. With that said, vehicle weight also plays an important factor in acceleration. 2010 Mazda 3 weights approximately 126 kg more than 2006 Mini One. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Mazda 3 (183 Nm @ 4500 RPM) has 2 more torque (in Nm) than 2006 Mini One. (181 Nm @ 2000 RPM). This means 2010 Mazda 3 will have an easier job in driving up hills or pulling heavy equipment than 2006 Mini One.

Compare all specifications:

2006 Mini One 2010 Mazda 3
Make Mini Mazda
Model One 3
Year Released 2006 2010
Engine Position Front Front
Engine Size 1364 cc 2000 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 74 HP 148 HP
Engine RPM 4000 RPM 6500 RPM
Torque 181 Nm 183 Nm
Torque RPM 2000 RPM 4500 RPM
Fuel Type Diesel Gasoline
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1175 kg 1301 kg
Vehicle Length 3630 mm 4590 mm
Vehicle Width 1690 mm 1755 mm
Vehicle Height 1410 mm 1471 mm
Wheelbase Size 2470 mm 2639 mm
Fuel Tank Capacity 50 L 55 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]