2006 Peugeot 206 vs. 2010 SsangYong Stavic
To start off, 2010 SsangYong Stavic is newer by 4 year(s). Which means there will be less support and parts availability for 2006 Peugeot 206. In addition, the cost of maintenance, including insurance, on 2006 Peugeot 206 would be higher. At 2,696 cc (5 cylinders), 2010 SsangYong Stavic is equipped with a bigger engine. In terms of performance, 2010 SsangYong Stavic (163 HP @ 4000 RPM) has 55 more horse power than 2006 Peugeot 206. (108 HP @ 4000 RPM) In normal driving conditions, 2010 SsangYong Stavic should accelerate faster than 2006 Peugeot 206. With that said, vehicle weight also plays an important factor in acceleration. 2010 SsangYong Stavic weights approximately 734 kg more than 2006 Peugeot 206. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 SsangYong Stavic is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 SsangYong Stavic. However, in wet, icy, snow, or gravel driving conditions, 2006 Peugeot 206, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 SsangYong Stavic (342 Nm @ 2400 RPM) has 97 more torque (in Nm) than 2006 Peugeot 206. (245 Nm @ 1750 RPM). This means 2010 SsangYong Stavic will have an easier job in driving up hills or pulling heavy equipment than 2006 Peugeot 206. 2010 SsangYong Stavic has automatic transmission and 2006 Peugeot 206 has manual transmission. 2006 Peugeot 206 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 SsangYong Stavic will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2006 Peugeot 206 | 2010 SsangYong Stavic | |
| Make | Peugeot | SsangYong |
| Model | 206 | Stavic |
| Year Released | 2006 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 1560 cc | 2696 cc |
| Engine Cylinders | 4 cylinders | 5 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 4 valves | 4 valves |
| Horse Power | 108 HP | 163 HP |
| Engine RPM | 4000 RPM | 4000 RPM |
| Torque | 245 Nm | 342 Nm |
| Torque RPM | 1750 RPM | 2400 RPM |
| Engine Bore Size | 75 mm | 86.2 mm |
| Engine Stroke Size | 88.6 mm | 92.4 mm |
| Engine Compression Ratio | 17.6:1 | 18.0:1 |
| Fuel Type | Diesel | Diesel |
| Top Speed | 190 km/hour | 174 km/hour |
| Acceleration 0-100mph | 10.4 seconds | 13.8 seconds |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 7 seats |
| Number of Doors | 5 doors | 5 doors |
| Vehicle Weight | 1189 kg | 1923 kg |
| Vehicle Length | 4030 mm | 5130 mm |
| Vehicle Width | 1660 mm | 1830 mm |
| Vehicle Height | 1470 mm | 1920 mm |
| Wheelbase Size | 2450 mm | 3010 mm |
| Fuel Consumption Overall | 4.8 L/100km | 9.9 L/100km |
| Fuel Tank Capacity | 50 L | 80 L |
