2006 Toyota MR2 vs. 2010 Chrysler Sebring
To start off, 2010 Chrysler Sebring is newer by 4 year(s). Which means there will be less support and parts availability for 2006 Toyota MR2. In addition, the cost of maintenance, including insurance, on 2006 Toyota MR2 would be higher. At 2,399 cc (4 cylinders), 2010 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring (171 HP @ 6000 RPM) has 33 more horse power than 2006 Toyota MR2. (138 HP @ 6400 RPM) In normal driving conditions, 2010 Chrysler Sebring should accelerate faster than 2006 Toyota MR2. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 565 kg more than 2006 Toyota MR2. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2006 Toyota MR2 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2006 Toyota MR2. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Toyota MR2 (170 Nm @ 4400 RPM) has 4 more torque (in Nm) than 2010 Chrysler Sebring. (166 Nm @ 4400 RPM). This means 2006 Toyota MR2 will have an easier job in driving up hills or pulling heavy equipment than 2010 Chrysler Sebring. 2010 Chrysler Sebring has automatic transmission and 2006 Toyota MR2 has manual transmission. 2006 Toyota MR2 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
2006 Toyota MR2 | 2010 Chrysler Sebring | |
Make | Toyota | Chrysler |
Model | MR2 | Sebring |
Year Released | 2006 | 2010 |
Body Type | Convertible | Sedan |
Engine Position | Middle | Front |
Engine Size | 1792 cc | 2399 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 138 HP | 171 HP |
Engine RPM | 6400 RPM | 6000 RPM |
Torque | 170 Nm | 166 Nm |
Torque RPM | 4400 RPM | 4400 RPM |
Engine Compression Ratio | 10.0:1 | 10.5:1 |
Fuel Type | Gasoline - Premium | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1065 kg | 1630 kg |
Vehicle Length | 3900 mm | 4850 mm |
Vehicle Width | 1700 mm | 1810 mm |
Vehicle Height | 1250 mm | 1550 mm |
Wheelbase Size | 2460 mm | 2770 mm |
Fuel Tank Capacity | 48 L | 64 L |