2007 BMW 325 vs. 2008 Mazda 3

To start off, 2008 Mazda 3 is newer by 1 year(s). Which means there will be less support and parts availability for 2007 BMW 325. In addition, the cost of maintenance, including insurance, on 2007 BMW 325 would be higher. At 2,497 cc (6 cylinders), 2007 BMW 325 is equipped with a bigger engine. In terms of performance, 2007 BMW 325 (215 HP @ 5600 RPM) has 66 more horse power than 2008 Mazda 3. (149 HP @ 6000 RPM). In normal driving conditions, 2007 BMW 325 should accelerate faster than 2008 Mazda 3. With that said, vehicle weight also plays an important factor in acceleration. 2007 BMW 325 weights approximately 185 kg more than 2008 Mazda 3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Let's talk about torque, 2007 BMW 325 (250 Nm @ 2750 RPM) has 63 more torque (in Nm) than 2008 Mazda 3. (187 Nm @ 4500 RPM). This means 2007 BMW 325 will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda 3.

Compare all specifications:

2007 BMW 325 2008 Mazda 3
Make BMW Mazda
Model 325 3
Year Released 2007 2008
Body Type Coupe Sedan
Engine Position Front Front
Engine Size 2497 cc 1999 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 215 HP 149 HP
Engine RPM 5600 RPM 6000 RPM
Torque 250 Nm 187 Nm
Torque RPM 2750 RPM 4500 RPM
Engine Bore Size 78.8 mm 87.5 mm
Engine Stroke Size 82 mm 83.1 mm
Engine Compression Ratio 11.0:1 11.0:1
Fuel Type Gasoline Gasoline - Premium
Top Speed 247 km/hour 208 km/hour
Acceleration 0-100mph 6.9 seconds 9 seconds
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1420 kg 1235 kg
Vehicle Length 4590 mm 4500 mm
Vehicle Width 1400 mm 1760 mm
Vehicle Height 1790 mm 1470 mm
Wheelbase Size 2770 mm 2650 mm
Fuel Consumption Overall 11.9 L/100km 7.2 L/100km
Fuel Tank Capacity 63 L 55 L