2007 BMW 325 vs. 2008 Mazda 6

To start off, 2008 Mazda 6 is newer by 1 year(s). Which means there will be less support and parts availability for 2007 BMW 325. In addition, the cost of maintenance, including insurance, on 2007 BMW 325 would be higher. At 2,495 cc (6 cylinders), 2007 BMW 325 is equipped with a bigger engine. In terms of performance, 2007 BMW 325 (215 HP @ 3500 RPM) has 59 more horse power than 2008 Mazda 6. (156 HP @ 6500 RPM). In normal driving conditions, 2007 BMW 325 should accelerate faster than 2008 Mazda 6. With that said, vehicle weight also plays an important factor in acceleration. 2007 BMW 325 weights approximately 141 kg more than 2008 Mazda 6. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2007 BMW 325 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2007 BMW 325. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 6, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2007 BMW 325 (250 Nm @ 2750 RPM) has 41 more torque (in Nm) than 2008 Mazda 6. (209 Nm @ 4000 RPM). This means 2007 BMW 325 will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda 6. 2008 Mazda 6 has automatic transmission and 2007 BMW 325 has manual transmission. 2007 BMW 325 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Mazda 6 will be easier to drive especially in heavy traffic.

Compare all specifications:

2007 BMW 325 2008 Mazda 6
Make BMW Mazda
Model 325 6
Year Released 2007 2008
Body Type Station Wagon Sedan
Engine Position Front Front
Engine Size 2495 cc 2260 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 215 HP 156 HP
Engine RPM 3500 RPM 6500 RPM
Torque 250 Nm 209 Nm
Torque RPM 2750 RPM 4000 RPM
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 5 doors 4 doors
Vehicle Weight 1470 kg 1329 kg
Vehicle Length 4530 mm 4750 mm
Vehicle Width 1420 mm 1790 mm
Vehicle Height 1820 mm 1450 mm
Wheelbase Size 2770 mm 2680 mm
Fuel Consumption Overall 8.6 L/100km 10 L/100km
Fuel Tank Capacity 63 L 68 L