2007 BMW 525 vs. 1980 Holden Kingswood

To start off, 2007 BMW 525 is newer by 27 year(s). Which means there will be less support and parts availability for 1980 Holden Kingswood. In addition, the cost of maintenance, including insurance, on 1980 Holden Kingswood would be higher. At 3,298 cc (6 cylinders), 1980 Holden Kingswood is equipped with a bigger engine. In terms of performance, 2007 BMW 525 (215 HP @ 6500 RPM) has 126 more horse power than 1980 Holden Kingswood. (89 HP @ 3600 RPM). In normal driving conditions, 2007 BMW 525 should accelerate faster than 1980 Holden Kingswood. With that said, vehicle weight also plays an important factor in acceleration. 2007 BMW 525 weights approximately 130 kg more than 1980 Holden Kingswood. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2007 BMW 525 (250 Nm @ 2900 RPM) has 29 more torque (in Nm) than 1980 Holden Kingswood. (221 Nm @ 2100 RPM). This means 2007 BMW 525 will have an easier job in driving up hills or pulling heavy equipment than 1980 Holden Kingswood.

Compare all specifications:

2007 BMW 525 1980 Holden Kingswood
Make BMW Holden
Model 525 Kingswood
Year Released 2007 1980
Engine Position Front Front
Engine Size 2497 cc 3298 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 215 HP 89 HP
Engine RPM 6500 RPM 3600 RPM
Torque 250 Nm 221 Nm
Torque RPM 2900 RPM 2100 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 1500 kg 1370 kg
Vehicle Length 4850 mm 4850 mm
Vehicle Width 1470 mm 1900 mm
Vehicle Height 1850 mm 1410 mm
Wheelbase Size 2890 mm 2830 mm