2007 BMW 550 vs. 2010 Ford Ranger

To start off, 2010 Ford Ranger is newer by 3 year(s). Which means there will be less support and parts availability for 2007 BMW 550. In addition, the cost of maintenance, including insurance, on 2007 BMW 550 would be higher. At 4,799 cc (8 cylinders), 2007 BMW 550 is equipped with a bigger engine. In terms of performance, 2007 BMW 550 (362 HP @ 6300 RPM) has 155 more horse power than 2010 Ford Ranger. (207 HP @ 5250 RPM). In normal driving conditions, 2007 BMW 550 should accelerate faster than 2010 Ford Ranger. With that said, vehicle weight also plays an important factor in acceleration. 2010 Ford Ranger weights approximately 4 kg more than 2007 BMW 550.

Because 2010 Ford Ranger is four wheel drive (4WD), it will have significant more traction and grip than 2007 BMW 550. In wet, icy, snow, or gravel driving conditions, 2010 Ford Ranger will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2007 BMW 550 (490 Nm @ 3400 RPM) has 168 more torque (in Nm) than 2010 Ford Ranger. (322 Nm @ 3000 RPM). This means 2007 BMW 550 will have an easier job in driving up hills or pulling heavy equipment than 2010 Ford Ranger.

Compare all specifications:

2007 BMW 550 2010 Ford Ranger
Make BMW Ford
Model 550 Ranger
Year Released 2007 2010
Engine Position Front Front
Engine Size 4799 cc 4000 cc
Engine Cylinders 8 cylinders 6 cylinders
Engine Type V V
Valves per Cylinder 4 valves 2 valves
Horse Power 362 HP 207 HP
Engine RPM 6300 RPM 5250 RPM
Torque 490 Nm 322 Nm
Torque RPM 3400 RPM 3000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Manual Manual
Number of Doors 5 doors 2 doors
Vehicle Weight 1660 kg 1664 kg
Vehicle Length 4850 mm 5171 mm
Vehicle Width 1470 mm 1811 mm
Vehicle Height 1850 mm 1720 mm
Wheelbase Size 2890 mm 3198 mm
Fuel Tank Capacity 70 L 74 L