2007 BMW X3 vs. 1980 Steyr G-series
To start off, 2007 BMW X3 is newer by 27 year(s). Which means there will be less support and parts availability for 1980 Steyr G-series. In addition, the cost of maintenance, including insurance, on 1980 Steyr G-series would be higher. At 2,746 cc (6 cylinders), 1980 Steyr G-series is equipped with a bigger engine. In terms of performance, both vehicles can yield 148 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1980 Steyr G-series weights approximately 260 kg more than 2007 BMW X3.
Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2007 BMW X3 (330 Nm @ 2000 RPM) has 104 more torque (in Nm) than 1980 Steyr G-series. (226 Nm @ 4250 RPM). This means 2007 BMW X3 will have an easier job in driving up hills or pulling heavy equipment than 1980 Steyr G-series.
Compare all specifications:
| 2007 BMW X3 | 1980 Steyr G-series | |
| Make | BMW | Steyr |
| Model | X3 | G-series |
| Year Released | 2007 | 1980 |
| Engine Size | 1994 cc | 2746 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 148 HP | 148 HP |
| Engine RPM | 4000 RPM | 5250 RPM |
| Torque | 330 Nm | 226 Nm |
| Torque RPM | 2000 RPM | 4250 RPM |
| Fuel Type | Diesel | Gasoline |
| Drive Type | 4WD | 4WD |
| Transmission Type | Manual | Manual |
| Vehicle Weight | 1740 kg | 2000 kg |
| Vehicle Length | 4570 mm | 4240 mm |
| Vehicle Width | 1680 mm | 1770 mm |
| Vehicle Height | 1860 mm | 1940 mm |
| Wheelbase Size | 2800 mm | 2410 mm |
