2007 Chevrolet Corvette vs. 1984 Daewoo Maepsy-Na
To start off, 2007 Chevrolet Corvette is newer by 23 year(s). Which means there will be less support and parts availability for 1984 Daewoo Maepsy-Na. In addition, the cost of maintenance, including insurance, on 1984 Daewoo Maepsy-Na would be higher. At 7,010 cc (8 cylinders), 2007 Chevrolet Corvette is equipped with a bigger engine. In terms of performance, 2007 Chevrolet Corvette (505 HP @ 6300 RPM) has 446 more horse power than 1984 Daewoo Maepsy-Na. (59 HP @ 5000 RPM). In normal driving conditions, 2007 Chevrolet Corvette should accelerate faster than 1984 Daewoo Maepsy-Na.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2007 Chevrolet Corvette (637 Nm @ 4800 RPM) has 536 more torque (in Nm) than 1984 Daewoo Maepsy-Na. (101 Nm @ 3000 RPM). This means 2007 Chevrolet Corvette will have an easier job in driving up hills or pulling heavy equipment than 1984 Daewoo Maepsy-Na.
Compare all specifications:
2007 Chevrolet Corvette | 1984 Daewoo Maepsy-Na | |
Make | Chevrolet | Daewoo |
Model | Corvette | Maepsy-Na |
Year Released | 2007 | 1984 |
Body Type | Coupe | Sedan |
Engine Position | Front | Front |
Engine Size | 7010 cc | 1492 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 505 HP | 59 HP |
Engine RPM | 6300 RPM | 5000 RPM |
Torque | 637 Nm | 101 Nm |
Torque RPM | 4800 RPM | 3000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Length | 4470 mm | 4270 mm |
Vehicle Width | 1930 mm | 1620 mm |
Vehicle Height | 1250 mm | 1370 mm |
Wheelbase Size | 2690 mm | 2410 mm |