2007 Chrysler 300 vs. 1954 GAZ M-20
To start off, 2007 Chrysler 300 is newer by 53 year(s). Which means there will be less support and parts availability for 1954 GAZ M-20. In addition, the cost of maintenance, including insurance, on 1954 GAZ M-20 would be higher. At 6,059 cc (8 cylinders), 2007 Chrysler 300 is equipped with a bigger engine. In terms of performance, 2007 Chrysler 300 (429 HP @ 6000 RPM) has 378 more horse power than 1954 GAZ M-20. (51 HP @ 3600 RPM). In normal driving conditions, 2007 Chrysler 300 should accelerate faster than 1954 GAZ M-20. With that said, vehicle weight also plays an important factor in acceleration. 2007 Chrysler 300 weights approximately 428 kg more than 1954 GAZ M-20. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 2007 Chrysler 300 (569 Nm @ 4800 RPM) has 444 more torque (in Nm) than 1954 GAZ M-20. (125 Nm @ 2200 RPM). This means 2007 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 1954 GAZ M-20. 2007 Chrysler 300 has automatic transmission and 1954 GAZ M-20 has manual transmission. 1954 GAZ M-20 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2007 Chrysler 300 will be easier to drive especially in heavy traffic.
Compare all specifications:
2007 Chrysler 300 | 1954 GAZ M-20 | |
Make | Chrysler | GAZ |
Model | 300 | M-20 |
Year Released | 2007 | 1954 |
Engine Size | 6059 cc | 2120 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 429 HP | 51 HP |
Engine RPM | 6000 RPM | 3600 RPM |
Torque | 569 Nm | 125 Nm |
Torque RPM | 4800 RPM | 2200 RPM |
Fuel Type | Gasoline | Gasoline |
Transmission Type | Automatic | Manual |
Vehicle Weight | 1888 kg | 1460 kg |
Vehicle Length | 5010 mm | 4670 mm |
Vehicle Width | 1480 mm | 1900 mm |
Vehicle Height | 1890 mm | 1650 mm |
Wheelbase Size | 3050 mm | 2710 mm |