2007 Chrysler Crossfire vs. 2010 Fiat Bravo
To start off, 2010 Fiat Bravo is newer by 3 year(s). Which means there will be less support and parts availability for 2007 Chrysler Crossfire. In addition, the cost of maintenance, including insurance, on 2007 Chrysler Crossfire would be higher. At 3,199 cc (6 cylinders), 2007 Chrysler Crossfire is equipped with a bigger engine. In terms of performance, 2007 Chrysler Crossfire (215 HP @ 5700 RPM) has 126 more horse power than 2010 Fiat Bravo. (89 HP @ 5500 RPM). In normal driving conditions, 2007 Chrysler Crossfire should accelerate faster than 2010 Fiat Bravo. With that said, vehicle weight also plays an important factor in acceleration. 2007 Chrysler Crossfire weights approximately 119 kg more than 2010 Fiat Bravo. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2007 Chrysler Crossfire is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2007 Chrysler Crossfire. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Bravo, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2007 Chrysler Crossfire (311 Nm @ 3000 RPM) has 183 more torque (in Nm) than 2010 Fiat Bravo. (128 Nm @ 4500 RPM). This means 2007 Chrysler Crossfire will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Bravo. 2007 Chrysler Crossfire has automatic transmission and 2010 Fiat Bravo has manual transmission. 2010 Fiat Bravo will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2007 Chrysler Crossfire will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2007 Chrysler Crossfire | 2010 Fiat Bravo | |
| Make | Chrysler | Fiat |
| Model | Crossfire | Bravo |
| Year Released | 2007 | 2010 |
| Body Type | Coupe | Hatchback |
| Engine Position | Front | Front |
| Engine Size | 3199 cc | 1368 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 3 valves | 4 valves |
| Horse Power | 215 HP | 89 HP |
| Engine RPM | 5700 RPM | 5500 RPM |
| Torque | 311 Nm | 128 Nm |
| Torque RPM | 3000 RPM | 4500 RPM |
| Engine Bore Size | 90 mm | 72 mm |
| Engine Stroke Size | 84 mm | 84 mm |
| Fuel Type | Gasoline | Gasoline - Premium |
| Top Speed | 242 km/hour | 179 km/hour |
| Acceleration 0-100mph | 6.5 seconds | 12.5 seconds |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 1399 kg | 1280 kg |
| Vehicle Length | 4070 mm | 4340 mm |
| Vehicle Width | 1770 mm | 1800 mm |
| Vehicle Height | 1310 mm | 1500 mm |
| Wheelbase Size | 2410 mm | 2610 mm |
| Fuel Consumption Overall | 10.1 L/100km | 6.9 L/100km |
| Fuel Tank Capacity | 60 L | 57 L |
