2007 Daihatsu Copen vs. 2012 Mercedes-Benz C

To start off, 2012 Mercedes-Benz C is newer by 5 year(s). Which means there will be less support and parts availability for 2007 Daihatsu Copen. In addition, the cost of maintenance, including insurance, on 2007 Daihatsu Copen would be higher. At 6,200 cc (8 cylinders), 2012 Mercedes-Benz C is equipped with a bigger engine. In terms of performance, 2012 Mercedes-Benz C (454 HP @ 6500 RPM) has 368 more horse power than 2007 Daihatsu Copen. (86 HP @ 6000 RPM) In normal driving conditions, 2012 Mercedes-Benz C should accelerate faster than 2007 Daihatsu Copen. With that said, vehicle weight also plays an important factor in acceleration. 2012 Mercedes-Benz C weights approximately 805 kg more than 2007 Daihatsu Copen. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2007 Daihatsu Copen is four wheel drive (4WD), it will have significant more traction and grip than 2012 Mercedes-Benz C. In wet, icy, snow, or gravel driving conditions, 2007 Daihatsu Copen will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Mercedes-Benz C (600 Nm @ 5000 RPM) has 480 more torque (in Nm) than 2007 Daihatsu Copen. (120 Nm @ 4400 RPM). This means 2012 Mercedes-Benz C will have an easier job in driving up hills or pulling heavy equipment than 2007 Daihatsu Copen. 2012 Mercedes-Benz C has automatic transmission and 2007 Daihatsu Copen has manual transmission. 2007 Daihatsu Copen will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Mercedes-Benz C will be easier to drive especially in heavy traffic.

Compare all specifications:

2007 Daihatsu Copen 2012 Mercedes-Benz C
Make Daihatsu Mercedes-Benz
Model Copen C
Year Released 2007 2012
Body Type Roadster Sedan
Engine Position Front Front
Engine Size 1298 cc 6200 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 4 valves
Horse Power 86 HP 454 HP
Engine RPM 6000 RPM 6500 RPM
Torque 120 Nm 600 Nm
Torque RPM 4400 RPM 5000 RPM
Fuel Type Gasoline Gasoline
Drive Type 4WD Rear
Transmission Type Manual 7-speed shiftable automatic
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 850 kg 1655 kg
Vehicle Length 3400 mm 4724 mm
Vehicle Width 1480 mm 1796 mm
Vehicle Height 1250 mm 1430 mm
Wheelbase Size 2230 mm 2766 mm
Fuel Tank Capacity 40 L 66 L