2007 Fiat Palio II vs. 2010 Toyota Sequoia
To start off, 2010 Toyota Sequoia is newer by 3 year(s). Which means there will be less support and parts availability for 2007 Fiat Palio II. In addition, the cost of maintenance, including insurance, on 2007 Fiat Palio II would be higher. At 4,600 cc (8 cylinders), 2010 Toyota Sequoia is equipped with a bigger engine. In terms of performance, 2010 Toyota Sequoia (310 HP @ 5400 RPM) has 210 more horse power than 2007 Fiat Palio II. (100 HP @ 5500 RPM) In normal driving conditions, 2010 Toyota Sequoia should accelerate faster than 2007 Fiat Palio II. With that said, vehicle weight also plays an important factor in acceleration. 2010 Toyota Sequoia weights approximately 1506 kg more than 2007 Fiat Palio II. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Toyota Sequoia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Toyota Sequoia. However, in wet, icy, snow, or gravel driving conditions, 2007 Fiat Palio II, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Toyota Sequoia (443 Nm @ 3400 RPM) has 303 more torque (in Nm) than 2007 Fiat Palio II. (140 Nm @ 4000 RPM). This means 2010 Toyota Sequoia will have an easier job in driving up hills or pulling heavy equipment than 2007 Fiat Palio II. 2010 Toyota Sequoia has automatic transmission and 2007 Fiat Palio II has manual transmission. 2007 Fiat Palio II will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Toyota Sequoia will be easier to drive especially in heavy traffic.
Compare all specifications:
2007 Fiat Palio II | 2010 Toyota Sequoia | |
Make | Fiat | Toyota |
Model | Palio II | Sequoia |
Year Released | 2007 | 2010 |
Engine Position | Front | Front |
Engine Size | 1580 cc | 4600 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 100 HP | 310 HP |
Engine RPM | 5500 RPM | 5400 RPM |
Torque | 140 Nm | 443 Nm |
Torque RPM | 4000 RPM | 3400 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 7 seats |
Number of Doors | 5 doors | 5 doors |
Vehicle Weight | 1070 kg | 2576 kg |
Vehicle Length | 3830 mm | 5210 mm |
Vehicle Width | 1640 mm | 2027 mm |
Vehicle Height | 1440 mm | 1895 mm |
Wheelbase Size | 2380 mm | 3099 mm |
Fuel Tank Capacity | 54 L | 100 L |