2007 Fiat Panda vs. 1980 Mercedes-Benz 500
To start off, 2007 Fiat Panda is newer by 27 year(s). Which means there will be less support and parts availability for 1980 Mercedes-Benz 500. In addition, the cost of maintenance, including insurance, on 1980 Mercedes-Benz 500 would be higher. At 4,972 cc (8 cylinders), 1980 Mercedes-Benz 500 is equipped with a bigger engine. In terms of performance, 1980 Mercedes-Benz 500 (242 HP @ 4750 RPM) has 188 more horse power than 2007 Fiat Panda. (54 HP @ 5000 RPM) In normal driving conditions, 1980 Mercedes-Benz 500 should accelerate faster than 2007 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 1980 Mercedes-Benz 500 weights approximately 700 kg more than 2007 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1980 Mercedes-Benz 500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Mercedes-Benz 500. However, in wet, icy, snow, or gravel driving conditions, 2007 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Mercedes-Benz 500 (401 Nm @ 3200 RPM) has 313 more torque (in Nm) than 2007 Fiat Panda. (88 Nm @ 2750 RPM). This means 1980 Mercedes-Benz 500 will have an easier job in driving up hills or pulling heavy equipment than 2007 Fiat Panda. 1980 Mercedes-Benz 500 has automatic transmission and 2007 Fiat Panda has manual transmission. 2007 Fiat Panda will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Mercedes-Benz 500 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2007 Fiat Panda | 1980 Mercedes-Benz 500 | |
| Make | Fiat | Mercedes-Benz |
| Model | Panda | 500 |
| Year Released | 2007 | 1980 |
| Engine Position | Front | Front |
| Engine Size | 1107 cc | 4972 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 54 HP | 242 HP |
| Engine RPM | 5000 RPM | 4750 RPM |
| Torque | 88 Nm | 401 Nm |
| Torque RPM | 2750 RPM | 3200 RPM |
| Engine Bore Size | 70 mm | 96.5 mm |
| Engine Stroke Size | 72 mm | 85 mm |
| Engine Compression Ratio | 10.0:1 | 8.8:1 |
| Fuel Type | Gasoline - Premium | Gasoline |
| Top Speed | 150 km/hour | 220 km/hour |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 2 seats |
| Number of Doors | 5 doors | 2 doors |
| Vehicle Weight | 840 kg | 1540 kg |
| Vehicle Length | 3540 mm | 4400 mm |
| Vehicle Width | 1580 mm | 1800 mm |
| Vehicle Height | 1550 mm | 1310 mm |
| Wheelbase Size | 2310 mm | 2470 mm |
| Fuel Tank Capacity | 35 L | 90 L |
