2007 Fiat Siena vs. 1971 Mercedes-Benz 300
To start off, 2007 Fiat Siena is newer by 36 year(s). Which means there will be less support and parts availability for 1971 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1971 Mercedes-Benz 300 would be higher. At 4,519 cc (8 cylinders), 1971 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1971 Mercedes-Benz 300 (195 HP @ 4500 RPM) has 95 more horse power than 2007 Fiat Siena. (100 HP @ 5500 RPM) In normal driving conditions, 1971 Mercedes-Benz 300 should accelerate faster than 2007 Fiat Siena. With that said, vehicle weight also plays an important factor in acceleration. 1971 Mercedes-Benz 300 weights approximately 685 kg more than 2007 Fiat Siena. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1971 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1971 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 2007 Fiat Siena, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1971 Mercedes-Benz 300 (358 Nm @ 3000 RPM) has 283 more torque (in Nm) than 2007 Fiat Siena. (75 Nm @ 5500 RPM). This means 1971 Mercedes-Benz 300 will have an easier job in driving up hills or pulling heavy equipment than 2007 Fiat Siena. 1971 Mercedes-Benz 300 has automatic transmission and 2007 Fiat Siena has manual transmission. 2007 Fiat Siena will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1971 Mercedes-Benz 300 will be easier to drive especially in heavy traffic.
Compare all specifications:
2007 Fiat Siena | 1971 Mercedes-Benz 300 | |
Make | Fiat | Mercedes-Benz |
Model | Siena | 300 |
Year Released | 2007 | 1971 |
Engine Position | Front | Front |
Engine Size | 1581 cc | 4519 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 100 HP | 195 HP |
Engine RPM | 5500 RPM | 4500 RPM |
Torque | 75 Nm | 358 Nm |
Torque RPM | 5500 RPM | 3000 RPM |
Engine Bore Size | 86.4 mm | 92 mm |
Engine Stroke Size | 67.4 mm | 85 mm |
Top Speed | 184 km/hour | 200 km/hour |
Acceleration 0-100mph | 11.5 seconds | 11 seconds |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1070 kg | 1755 kg |
Vehicle Width | 1640 mm | 1820 mm |
Vehicle Height | 1440 mm | 1450 mm |
Wheelbase Size | 2380 mm | 2860 mm |
Fuel Tank Capacity | 54 L | 82 L |