2007 Ford Bantam vs. 1980 Oldsmobile Ninety-Eight
To start off, 2007 Ford Bantam is newer by 27 year(s). Which means there will be less support and parts availability for 1980 Oldsmobile Ninety-Eight. In addition, the cost of maintenance, including insurance, on 1980 Oldsmobile Ninety-Eight would be higher. At 4,129 cc (6 cylinders), 1980 Oldsmobile Ninety-Eight is equipped with a bigger engine. In terms of performance, 1980 Oldsmobile Ninety-Eight (123 HP @ 4000 RPM) has 29 more horse power than 2007 Ford Bantam. (94 HP @ 5500 RPM) In normal driving conditions, 1980 Oldsmobile Ninety-Eight should accelerate faster than 2007 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 1980 Oldsmobile Ninety-Eight weights approximately 717 kg more than 2007 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1980 Oldsmobile Ninety-Eight is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Oldsmobile Ninety-Eight. However, in wet, icy, snow, or gravel driving conditions, 2007 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Oldsmobile Ninety-Eight (278 Nm @ 2000 RPM) has 143 more torque (in Nm) than 2007 Ford Bantam. (135 Nm @ 2500 RPM). This means 1980 Oldsmobile Ninety-Eight will have an easier job in driving up hills or pulling heavy equipment than 2007 Ford Bantam. 1980 Oldsmobile Ninety-Eight has automatic transmission and 2007 Ford Bantam has manual transmission. 2007 Ford Bantam will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Oldsmobile Ninety-Eight will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2007 Ford Bantam | 1980 Oldsmobile Ninety-Eight | |
| Make | Ford | Oldsmobile |
| Model | Bantam | Ninety-Eight |
| Year Released | 2007 | 1980 |
| Engine Position | Front | Front |
| Engine Size | 1597 cc | 4129 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 94 HP | 123 HP |
| Engine RPM | 5500 RPM | 4000 RPM |
| Torque | 135 Nm | 278 Nm |
| Torque RPM | 2500 RPM | 2000 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Vehicle Weight | 1038 kg | 1755 kg |
| Vehicle Length | 4280 mm | 5610 mm |
| Vehicle Width | 1640 mm | 1960 mm |
| Vehicle Height | 1470 mm | 1420 mm |
| Wheelbase Size | 2670 mm | 3030 mm |
