2007 Ford Bantam vs. 2009 Fiat Siena
To start off, 2009 Fiat Siena is newer by 2 year(s). Which means there will be less support and parts availability for 2007 Ford Bantam. In addition, the cost of maintenance, including insurance, on 2007 Ford Bantam would be higher. At 1,697 cc (4 cylinders), 2009 Fiat Siena is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2009 Fiat Siena weights approximately 52 kg more than 2007 Ford Bantam.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, both vehicles can yield 135 Nm of torque. So under normal driving conditions, the ability to climb up hills and pull heavy equipment should be relatively similar for both vehicles.
Compare all specifications:
2007 Ford Bantam | 2009 Fiat Siena | |
Make | Ford | Fiat |
Model | Bantam | Siena |
Year Released | 2007 | 2009 |
Body Type | Pickup | Sedan |
Engine Position | Front | Front |
Engine Size | 1597 cc | 1697 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 94 HP | 0 HP |
Torque | 135 Nm | 135 Nm |
Torque RPM | 2500 RPM | 2500 RPM |
Engine Compression Ratio | 9.5:1 | 20.3:1 |
Fuel Type | Gasoline | Diesel |
Top Speed | 176 km/hour | 160 km/hour |
Acceleration 0-100mph | 11.2 seconds | 16.3 seconds |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1038 kg | 1090 kg |
Vehicle Length | 4280 mm | 4140 mm |
Vehicle Width | 1640 mm | 1640 mm |
Vehicle Height | 1470 mm | 1440 mm |
Wheelbase Size | 2670 mm | 2380 mm |
Fuel Consumption Overall | 9.4 L/100km | 6.9 L/100km |
Fuel Tank Capacity | 54 L | 47 L |