2007 Ford Bantam vs. 2009 Mercedes-Benz CL

To start off, 2009 Mercedes-Benz CL is newer by 2 year(s). Which means there will be less support and parts availability for 2007 Ford Bantam. In addition, the cost of maintenance, including insurance, on 2007 Ford Bantam would be higher. At 6,208 cc (8 cylinders), 2009 Mercedes-Benz CL is equipped with a bigger engine. In terms of performance, 2009 Mercedes-Benz CL (518 HP @ 6800 RPM) has 424 more horse power than 2007 Ford Bantam. (94 HP @ 5500 RPM) In normal driving conditions, 2009 Mercedes-Benz CL should accelerate faster than 2007 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 2009 Mercedes-Benz CL weights approximately 288 kg more than 2007 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2009 Mercedes-Benz CL is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2009 Mercedes-Benz CL. However, in wet, icy, snow, or gravel driving conditions, 2007 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Mercedes-Benz CL (630 Nm @ 5000 RPM) has 495 more torque (in Nm) than 2007 Ford Bantam. (135 Nm @ 2500 RPM). This means 2009 Mercedes-Benz CL will have an easier job in driving up hills or pulling heavy equipment than 2007 Ford Bantam. 2009 Mercedes-Benz CL has automatic transmission and 2007 Ford Bantam has manual transmission. 2007 Ford Bantam will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Mercedes-Benz CL will be easier to drive especially in heavy traffic.

Compare all specifications:

2007 Ford Bantam 2009 Mercedes-Benz CL
Make Ford Mercedes-Benz
Model Bantam CL
Year Released 2007 2009
Body Type Pickup Coupe
Engine Position Front Front
Engine Size 1597 cc 6208 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 94 HP 518 HP
Engine RPM 5500 RPM 6800 RPM
Torque 135 Nm 630 Nm
Torque RPM 2500 RPM 5000 RPM
Engine Bore Size 82 mm 102.2 mm
Engine Stroke Size 75.5 mm 94.6 mm
Engine Compression Ratio 9.5:1 11.3:1
Fuel Type Gasoline Gasoline
Top Speed 176 km/hour 250 km/hour
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Seats 2 seats 4 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1038 kg 1326 kg
Vehicle Length 4280 mm 5070 mm
Vehicle Width 1640 mm 1420 mm
Vehicle Height 1470 mm 1880 mm
Wheelbase Size 2670 mm 2960 mm
Fuel Consumption Overall 9.4 L/100km 6.6 L/100km
Fuel Tank Capacity 54 L 90 L