2007 Ford Bantam vs. 2010 Cadillac CTS

To start off, 2010 Cadillac CTS is newer by 3 year(s). Which means there will be less support and parts availability for 2007 Ford Bantam. In addition, the cost of maintenance, including insurance, on 2007 Ford Bantam would be higher. At 3,600 cc (6 cylinders), 2010 Cadillac CTS is equipped with a bigger engine. In terms of performance, 2010 Cadillac CTS (304 HP @ 6400 RPM) has 210 more horse power than 2007 Ford Bantam. (94 HP @ 5500 RPM) In normal driving conditions, 2010 Cadillac CTS should accelerate faster than 2007 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 2010 Cadillac CTS weights approximately 777 kg more than 2007 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 Cadillac CTS is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Cadillac CTS. However, in wet, icy, snow, or gravel driving conditions, 2007 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Cadillac CTS (370 Nm @ 5200 RPM) has 235 more torque (in Nm) than 2007 Ford Bantam. (135 Nm @ 2500 RPM). This means 2010 Cadillac CTS will have an easier job in driving up hills or pulling heavy equipment than 2007 Ford Bantam. 2010 Cadillac CTS has automatic transmission and 2007 Ford Bantam has manual transmission. 2007 Ford Bantam will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Cadillac CTS will be easier to drive especially in heavy traffic.

Compare all specifications:

2007 Ford Bantam 2010 Cadillac CTS
Make Ford Cadillac
Model Bantam CTS
Year Released 2007 2010
Body Type Pickup Station Wagon
Engine Position Front Front
Engine Size 1597 cc 3600 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 94 HP 304 HP
Engine RPM 5500 RPM 6400 RPM
Torque 135 Nm 370 Nm
Torque RPM 2500 RPM 5200 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 980 kg 1757 kg
Vehicle Length 4280 mm 4867 mm
Vehicle Width 1470 mm 1842 mm
Vehicle Height 1640 mm 1473 mm
Wheelbase Size 2670 mm 2880 mm
Fuel Tank Capacity 54 L 68 L