2007 Ford Bantam vs. 2010 Mercury Mountaineer
To start off, 2010 Mercury Mountaineer is newer by 3 year(s). Which means there will be less support and parts availability for 2007 Ford Bantam. In addition, the cost of maintenance, including insurance, on 2007 Ford Bantam would be higher. At 4,000 cc (6 cylinders), 2010 Mercury Mountaineer is equipped with a bigger engine. In terms of performance, 2010 Mercury Mountaineer (210 HP @ 5100 RPM) has 116 more horse power than 2007 Ford Bantam. (94 HP @ 5500 RPM) In normal driving conditions, 2010 Mercury Mountaineer should accelerate faster than 2007 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 2010 Mercury Mountaineer weights approximately 1054 kg more than 2007 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Mercury Mountaineer is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Mercury Mountaineer. However, in wet, icy, snow, or gravel driving conditions, 2007 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Mercury Mountaineer (344 Nm @ 3700 RPM) has 209 more torque (in Nm) than 2007 Ford Bantam. (135 Nm @ 2500 RPM). This means 2010 Mercury Mountaineer will have an easier job in driving up hills or pulling heavy equipment than 2007 Ford Bantam. 2010 Mercury Mountaineer has automatic transmission and 2007 Ford Bantam has manual transmission. 2007 Ford Bantam will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Mercury Mountaineer will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2007 Ford Bantam | 2010 Mercury Mountaineer | |
| Make | Ford | Mercury |
| Model | Bantam | Mountaineer |
| Year Released | 2007 | 2010 |
| Body Type | Pickup | SUV |
| Engine Position | Front | Front |
| Engine Size | 1597 cc | 4000 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 94 HP | 210 HP |
| Engine RPM | 5500 RPM | 5100 RPM |
| Torque | 135 Nm | 344 Nm |
| Torque RPM | 2500 RPM | 3700 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 2 seats | 7 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 1038 kg | 2092 kg |
| Vehicle Length | 4280 mm | 4915 mm |
| Vehicle Width | 1640 mm | 1872 mm |
| Vehicle Height | 1470 mm | 1826 mm |
| Wheelbase Size | 2670 mm | 2888 mm |
| Fuel Tank Capacity | 54 L | 85 L |
