2007 Ford F-250 vs. 1990 Venturi Coupe

To start off, 2007 Ford F-250 is newer by 17 year(s). Which means there will be less support and parts availability for 1990 Venturi Coupe. In addition, the cost of maintenance, including insurance, on 1990 Venturi Coupe would be higher. At 4,200 cc (6 cylinders), 2007 Ford F-250 is equipped with a bigger engine. In terms of performance, 1990 Venturi Coupe (197 HP @ 5750 RPM) has 20 more horse power than 2007 Ford F-250. (177 HP @ 3800 RPM) In normal driving conditions, 1990 Venturi Coupe should accelerate faster than 2007 Ford F-250. With that said, vehicle weight also plays an important factor in acceleration. 2007 Ford F-250 weights approximately 1637 kg more than 1990 Venturi Coupe.

Because 2007 Ford F-250 is four wheel drive (4WD), it will have significant more traction and grip than 1990 Venturi Coupe. In wet, icy, snow, or gravel driving conditions, 2007 Ford F-250 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2007 Ford F-250 (500 Nm @ 2000 RPM) has 204 more torque (in Nm) than 1990 Venturi Coupe. (296 Nm @ 2500 RPM). This means 2007 Ford F-250 will have an easier job in driving up hills or pulling heavy equipment than 1990 Venturi Coupe.

Compare all specifications:

2007 Ford F-250 1990 Venturi Coupe
Make Ford Venturi
Model F-250 Coupe
Year Released 2007 1990
Body Type Pickup Coupe
Engine Position Front Middle
Engine Size 4200 cc 2458 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 177 HP 197 HP
Engine RPM 3800 RPM 5750 RPM
Torque 500 Nm 296 Nm
Torque RPM 2000 RPM 2500 RPM
Fuel Type Diesel Gasoline
Drive Type 4WD Rear
Transmission Type Manual Manual
Number of Seats 2 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 2892 kg 1255 kg
Vehicle Length 5760 mm 4100 mm
Vehicle Width 1870 mm 1710 mm
Vehicle Height 2040 mm 1180 mm
Wheelbase Size 3490 mm 2410 mm