2007 Infiniti QX56 vs. 2000 MCC ForTwo

To start off, 2007 Infiniti QX56 is newer by 7 year(s). Which means there will be less support and parts availability for 2000 MCC ForTwo. In addition, the cost of maintenance, including insurance, on 2000 MCC ForTwo would be higher. At 5,552 cc (8 cylinders), 2007 Infiniti QX56 is equipped with a bigger engine. In terms of performance, 2007 Infiniti QX56 (320 HP @ 4900 RPM) has 280 more horse power than 2000 MCC ForTwo. (40 HP @ 4200 RPM). In normal driving conditions, 2007 Infiniti QX56 should accelerate faster than 2000 MCC ForTwo.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2007 Infiniti QX56 (533 Nm @ 3600 RPM) has 433 more torque (in Nm) than 2000 MCC ForTwo. (100 Nm @ 1800 RPM). This means 2007 Infiniti QX56 will have an easier job in driving up hills or pulling heavy equipment than 2000 MCC ForTwo. 2007 Infiniti QX56 has automatic transmission and 2000 MCC ForTwo has manual transmission. 2000 MCC ForTwo will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2007 Infiniti QX56 will be easier to drive especially in heavy traffic.

Compare all specifications:

2007 Infiniti QX56 2000 MCC ForTwo
Make Infiniti MCC
Model QX56 ForTwo
Year Released 2007 2000
Body Type SUV Convertible
Engine Position Front Rear
Engine Size 5552 cc 799 cc
Engine Cylinders 8 cylinders 3 cylinders
Engine Type V in-line
Horse Power 320 HP 40 HP
Engine RPM 4900 RPM 4200 RPM
Torque 533 Nm 100 Nm
Torque RPM 3600 RPM 1800 RPM
Fuel Type Diesel Gasoline
Drive Type Rear Rear
Transmission Type Automatic Manual
Vehicle Length 5260 mm 2510 mm
Vehicle Width 2010 mm 1550 mm
Vehicle Height 1960 mm 1540 mm
Wheelbase Size 3140 mm 1810 mm