2007 Mercedes-Benz C vs. 2013 Mazda 6

To start off, 2013 Mazda 6 is newer by 6 year(s). Which means there will be less support and parts availability for 2007 Mercedes-Benz C. In addition, the cost of maintenance, including insurance, on 2007 Mercedes-Benz C would be higher. At 2,996 cc (6 cylinders), 2007 Mercedes-Benz C is equipped with a bigger engine. In terms of performance, 2007 Mercedes-Benz C (228 HP @ 6000 RPM) has 60 more horse power than 2013 Mazda 6. (168 HP @ 6000 RPM). In normal driving conditions, 2007 Mercedes-Benz C should accelerate faster than 2013 Mazda 6. With that said, vehicle weight also plays an important factor in acceleration. 2007 Mercedes-Benz C weights approximately 141 kg more than 2013 Mazda 6. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2007 Mercedes-Benz C is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2007 Mercedes-Benz C. However, in wet, icy, snow, or gravel driving conditions, 2013 Mazda 6, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2007 Mercedes-Benz C (300 Nm @ 2500 RPM) has 74 more torque (in Nm) than 2013 Mazda 6. (226 Nm @ 4000 RPM). This means 2007 Mercedes-Benz C will have an easier job in driving up hills or pulling heavy equipment than 2013 Mazda 6. 2007 Mercedes-Benz C has automatic transmission and 2013 Mazda 6 has manual transmission. 2013 Mazda 6 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2007 Mercedes-Benz C will be easier to drive especially in heavy traffic.

Compare all specifications:

2007 Mercedes-Benz C 2013 Mazda 6
Make Mercedes-Benz Mazda
Model C 6
Year Released 2007 2013
Body Type Sedan Sedan
Engine Position Front Front
Engine Size 2996 cc 2489 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 228 HP 168 HP
Engine RPM 6000 RPM 6000 RPM
Torque 300 Nm 226 Nm
Torque RPM 2500 RPM 4000 RPM
Engine Bore Size 88.1 mm 89 mm
Engine Stroke Size 82.1 mm 100 mm
Engine Compression Ratio 11.1:1 9.7:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Automatic 6-speed manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1640 kg 1499 kg
Vehicle Length 4530 mm 4940 mm
Vehicle Width 1430 mm 1840 mm
Vehicle Height 1730 mm 1470 mm
Wheelbase Size 2720 mm 2790 mm
Fuel Tank Capacity 62 L 70 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]