2007 Mercedes-Benz S vs. 2010 Chrysler Sebring
To start off, 2010 Chrysler Sebring is newer by 3 year(s). Which means there will be less support and parts availability for 2007 Mercedes-Benz S. In addition, the cost of maintenance, including insurance, on 2007 Mercedes-Benz S would be higher. At 5,512 cc (12 cylinders), 2007 Mercedes-Benz S is equipped with a bigger engine. In terms of performance, 2007 Mercedes-Benz S (510 HP @ 5000 RPM) has 356 more horse power than 2010 Chrysler Sebring. (154 HP @ 6300 RPM). In normal driving conditions, 2007 Mercedes-Benz S should accelerate faster than 2010 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2007 Mercedes-Benz S weights approximately 545 kg more than 2010 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2007 Mercedes-Benz S is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2007 Mercedes-Benz S. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2007 Mercedes-Benz S (830 Nm @ 1900 RPM) has 640 more torque (in Nm) than 2010 Chrysler Sebring. (190 Nm @ 5100 RPM). This means 2007 Mercedes-Benz S will have an easier job in driving up hills or pulling heavy equipment than 2010 Chrysler Sebring. 2007 Mercedes-Benz S has automatic transmission and 2010 Chrysler Sebring has manual transmission. 2010 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2007 Mercedes-Benz S will be easier to drive especially in heavy traffic.
Compare all specifications:
2007 Mercedes-Benz S | 2010 Chrysler Sebring | |
Make | Mercedes-Benz | Chrysler |
Model | S | Sebring |
Year Released | 2007 | 2010 |
Body Type | Sedan | Coupe |
Engine Position | Front | Front |
Engine Size | 5512 cc | 1998 cc |
Engine Cylinders | 12 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 3 valves | 4 valves |
Horse Power | 510 HP | 154 HP |
Engine RPM | 5000 RPM | 6300 RPM |
Torque | 830 Nm | 190 Nm |
Torque RPM | 1900 RPM | 5100 RPM |
Engine Compression Ratio | 9.0:1 | 10.5:1 |
Fuel Type | Gasoline | Gasoline |
Top Speed | 250 km/hour | 190 km/hour |
Acceleration 0-100mph | 4.6 seconds | 12.3 seconds |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 2180 kg | 1635 kg |
Vehicle Length | 5210 mm | 4860 mm |
Vehicle Width | 1480 mm | 1850 mm |
Vehicle Height | 1880 mm | 1500 mm |
Wheelbase Size | 3170 mm | 2770 mm |
Fuel Consumption Overall | 14.3 L/100km | 7.8 L/100km |
Fuel Tank Capacity | 90 L | 63 L |