2007 Mercury Milan vs. 2012 Ford Bantam
To start off, 2012 Ford Bantam is newer by 5 year(s). Which means there will be less support and parts availability for 2007 Mercury Milan. In addition, the cost of maintenance, including insurance, on 2007 Mercury Milan would be higher. At 2,299 cc (4 cylinders), 2007 Mercury Milan is equipped with a bigger engine. In terms of performance, 2007 Mercury Milan (160 HP) has 86 more horse power than 2012 Ford Bantam. (74 HP). In normal driving conditions, 2007 Mercury Milan should accelerate faster than 2012 Ford Bantam.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2007 Mercury Milan (203 Nm @ 4250 RPM) has 93 more torque (in Nm) than 2012 Ford Bantam. (110 Nm @ 3000 RPM). This means 2007 Mercury Milan will have an easier job in driving up hills or pulling heavy equipment than 2012 Ford Bantam.
Compare all specifications:
2007 Mercury Milan | 2012 Ford Bantam | |
Make | Mercury | Ford |
Model | Milan | Bantam |
Year Released | 2007 | 2012 |
Body Type | Sedan | Pickup |
Engine Position | Front | Front |
Engine Size | 2299 cc | 1296 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 160 HP | 74 HP |
Torque | 203 Nm | 110 Nm |
Torque RPM | 4250 RPM | 3000 RPM |
Engine Bore Size | 86.4 mm | 74 mm |
Engine Stroke Size | 94 mm | 75.5 mm |
Engine Compression Ratio | 9.7:1 | 10.2:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Length | 4870 mm | 4280 mm |
Vehicle Width | 1840 mm | 1470 mm |
Vehicle Height | 1460 mm | 1640 mm |
Wheelbase Size | 2730 mm | 2670 mm |
Fuel Tank Capacity | 66 L | 54 L |