2007 Nissan Frontier vs. 2010 Mercedes-Benz CLC

To start off, 2010 Mercedes-Benz CLC is newer by 3 year(s). Which means there will be less support and parts availability for 2007 Nissan Frontier. In addition, the cost of maintenance, including insurance, on 2007 Nissan Frontier would be higher. At 3,954 cc (6 cylinders), 2007 Nissan Frontier is equipped with a bigger engine. In terms of performance, 2007 Nissan Frontier (261 HP @ 5600 RPM) has 80 more horse power than 2010 Mercedes-Benz CLC. (181 HP @ 5500 RPM). In normal driving conditions, 2007 Nissan Frontier should accelerate faster than 2010 Mercedes-Benz CLC. With that said, vehicle weight also plays an important factor in acceleration. 2007 Nissan Frontier weights approximately 75 kg more than 2010 Mercedes-Benz CLC. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2007 Nissan Frontier is four wheel drive (4WD), it will have significant more traction and grip than 2010 Mercedes-Benz CLC. In wet, icy, snow, or gravel driving conditions, 2007 Nissan Frontier will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2007 Nissan Frontier (382 Nm @ 4000 RPM) has 132 more torque (in Nm) than 2010 Mercedes-Benz CLC. (250 Nm @ 5000 RPM). This means 2007 Nissan Frontier will have an easier job in driving up hills or pulling heavy equipment than 2010 Mercedes-Benz CLC. 2007 Nissan Frontier has automatic transmission and 2010 Mercedes-Benz CLC has manual transmission. 2010 Mercedes-Benz CLC will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2007 Nissan Frontier will be easier to drive especially in heavy traffic.

Compare all specifications:

2007 Nissan Frontier 2010 Mercedes-Benz CLC
Make Nissan Mercedes-Benz
Model Frontier CLC
Year Released 2007 2010
Body Type Pickup Sedan
Engine Position Front Front
Engine Size 3954 cc 1795 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 261 HP 181 HP
Engine RPM 5600 RPM 5500 RPM
Torque 382 Nm 250 Nm
Torque RPM 4000 RPM 5000 RPM
Engine Bore Size 96 mm 82 mm
Engine Stroke Size 92 mm 85 mm
Fuel Type Gasoline Gasoline
Drive Type 4WD Rear
Transmission Type Automatic Manual
Number of Seats 5 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1540 kg 1465 kg
Vehicle Length 5230 mm 4460 mm
Vehicle Width 1860 mm 1730 mm
Vehicle Height 1790 mm 1410 mm
Wheelbase Size 3200 mm 2720 mm
Fuel Consumption Overall 13.1 L/100km 8.4 L/100km
Fuel Tank Capacity 80 L 62 L