2008 Acura TL vs. 1978 Chrysler 160

To start off, 2008 Acura TL is newer by 30 year(s). Which means there will be less support and parts availability for 1978 Chrysler 160. In addition, the cost of maintenance, including insurance, on 1978 Chrysler 160 would be higher. At 3,210 cc (6 cylinders), 2008 Acura TL is equipped with a bigger engine. In terms of performance, 2008 Acura TL (258 HP @ 6200 RPM) has 169 more horse power than 1978 Chrysler 160. (89 HP @ 5800 RPM). In normal driving conditions, 2008 Acura TL should accelerate faster than 1978 Chrysler 160. With that said, vehicle weight also plays an important factor in acceleration. 2008 Acura TL weights approximately 493 kg more than 1978 Chrysler 160. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 Acura TL is four wheel drive (4WD), it will have significant more traction and grip than 1978 Chrysler 160. In wet, icy, snow, or gravel driving conditions, 2008 Acura TL will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Acura TL (316 Nm @ 5000 RPM) has 183 more torque (in Nm) than 1978 Chrysler 160. (133 Nm @ 3400 RPM). This means 2008 Acura TL will have an easier job in driving up hills or pulling heavy equipment than 1978 Chrysler 160.

Compare all specifications:

2008 Acura TL 1978 Chrysler 160
Make Acura Chrysler
Model TL 160
Year Released 2008 1978
Engine Position Front Front
Engine Size 3210 cc 1639 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type V in-line
Horse Power 258 HP 89 HP
Engine RPM 6200 RPM 5800 RPM
Torque 316 Nm 133 Nm
Torque RPM 5000 RPM 3400 RPM
Fuel Type Gasoline Gasoline
Drive Type 4WD Rear
Number of Seats 5 seats 5 seats
Vehicle Weight 1578 kg 1085 kg
Vehicle Length 4810 mm 4540 mm
Vehicle Width 1920 mm 1730 mm
Vehicle Height 1450 mm 1440 mm
Wheelbase Size 2750 mm 2680 mm