2008 Acura TL vs. 1995 Nissan Almera

To start off, 2008 Acura TL is newer by 13 year(s). Which means there will be less support and parts availability for 1995 Nissan Almera. In addition, the cost of maintenance, including insurance, on 1995 Nissan Almera would be higher. At 3,210 cc (6 cylinders), 2008 Acura TL is equipped with a bigger engine. In terms of performance, 2008 Acura TL (258 HP @ 6200 RPM) has 160 more horse power than 1995 Nissan Almera. (98 HP @ 6000 RPM). In normal driving conditions, 2008 Acura TL should accelerate faster than 1995 Nissan Almera.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Acura TL (316 Nm @ 5000 RPM) has 180 more torque (in Nm) than 1995 Nissan Almera. (136 Nm @ 4000 RPM). This means 2008 Acura TL will have an easier job in driving up hills or pulling heavy equipment than 1995 Nissan Almera. 2008 Acura TL has automatic transmission and 1995 Nissan Almera has manual transmission. 1995 Nissan Almera will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Acura TL will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Acura TL 1995 Nissan Almera
Make Acura Nissan
Model TL Almera
Year Released 2008 1995
Body Type Sedan Hatchback
Engine Position Front Front
Engine Size 3210 cc 1597 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 258 HP 98 HP
Engine RPM 6200 RPM 6000 RPM
Torque 316 Nm 136 Nm
Torque RPM 5000 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Front
Transmission Type Automatic Manual
Number of Seats 5 seats 2 seats
Number of Doors 4 doors 3 doors
Vehicle Length 4810 mm 4130 mm
Vehicle Width 1840 mm 1700 mm
Vehicle Height 1450 mm 1400 mm
Wheelbase Size 2810 mm 2540 mm