2008 Alfa Romeo Brera vs. 1983 Mazda RX-7

To start off, 2008 Alfa Romeo Brera is newer by 25 year(s). Which means there will be less support and parts availability for 1983 Mazda RX-7. In addition, the cost of maintenance, including insurance, on 1983 Mazda RX-7 would be higher. At 2,292 cc, 1983 Mazda RX-7 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Alfa Romeo Brera weights approximately 410 kg more than 1983 Mazda RX-7.

Because 1983 Mazda RX-7 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1983 Mazda RX-7. However, in wet, icy, snow, or gravel driving conditions, 2008 Alfa Romeo Brera, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Alfa Romeo Brera (230 Nm @ 4500 RPM) has 85 more torque (in Nm) than 1983 Mazda RX-7. (145 Nm @ 4000 RPM). This means 2008 Alfa Romeo Brera will have an easier job in driving up hills or pulling heavy equipment than 1983 Mazda RX-7.

Compare all specifications:

2008 Alfa Romeo Brera 1983 Mazda RX-7
Make Alfa Romeo Mazda
Model Brera RX-7
Year Released 2008 1983
Body Type Hatchback Coupe
Engine Position Front Front
Engine Size 2196 cc 2292 cc
Engine Type in-line dual-disk rotary
Horse Power 0 HP 105 HP
Torque 230 Nm 145 Nm
Torque RPM 4500 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Manual Manual
Number of Doors 3 doors 2 doors
Vehicle Weight 1470 kg 1060 kg
Vehicle Length 4420 mm 4290 mm
Vehicle Width 1840 mm 1680 mm
Vehicle Height 1350 mm 1270 mm
Wheelbase Size 2530 mm 2430 mm
Fuel Tank Capacity 70 L 65 L