2008 Alpina B3 vs. 1958 Austin A 35

To start off, 2008 Alpina B3 is newer by 50 year(s). Which means there will be less support and parts availability for 1958 Austin A 35. In addition, the cost of maintenance, including insurance, on 1958 Austin A 35 would be higher. At 3,346 cc (6 cylinders), 2008 Alpina B3 is equipped with a bigger engine. In terms of performance, 2008 Alpina B3 (301 HP @ 6300 RPM) has 267 more horse power than 1958 Austin A 35. (34 HP @ 4750 RPM). In normal driving conditions, 2008 Alpina B3 should accelerate faster than 1958 Austin A 35. With that said, vehicle weight also plays an important factor in acceleration. 2008 Alpina B3 weights approximately 762 kg more than 1958 Austin A 35. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Let's talk about torque, 2008 Alpina B3 (362 Nm @ 4800 RPM) has 294 more torque (in Nm) than 1958 Austin A 35. (68 Nm @ 2000 RPM). This means 2008 Alpina B3 will have an easier job in driving up hills or pulling heavy equipment than 1958 Austin A 35.

Compare all specifications:

2008 Alpina B3 1958 Austin A 35
Make Alpina Austin
Model B3 A 35
Year Released 2008 1958
Engine Position Front Front
Engine Size 3346 cc 948 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 301 HP 34 HP
Engine RPM 6300 RPM 4750 RPM
Torque 362 Nm 68 Nm
Torque RPM 4800 RPM 2000 RPM
Engine Bore Size 87 mm 62.9 mm
Engine Stroke Size 93.8 mm 76.2 mm
Engine Compression Ratio 10.2:1 8.3:1
Fuel Type Gasoline - Premium Gasoline
Number of Seats 5 seats 5 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1452 kg 690 kg
Vehicle Length 4490 mm 3470 mm
Vehicle Width 1760 mm 1410 mm
Vehicle Height 1370 mm 1490 mm
Wheelbase Size 2730 mm 2030 mm
Fuel Tank Capacity 63 L 26 L