2008 Aston Martin DB7 vs. 2008 BMW 320

To start off, both 2008 Aston Martin DB7 and 2008 BMW 320 were released in the same year (2008). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 5,935 cc (12 cylinders), 2008 Aston Martin DB7 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Aston Martin DB7 weights approximately 370 kg more than 2008 BMW 320.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Aston Martin DB7 (542 Nm @ 5000 RPM) has 212 more torque (in Nm) than 2008 BMW 320. (330 Nm @ 2000 RPM). This means 2008 Aston Martin DB7 will have an easier job in driving up hills or pulling heavy equipment than 2008 BMW 320.

Compare all specifications:

2008 Aston Martin DB7 2008 BMW 320
Make Aston Martin BMW
Model DB7 320
Year Released 2008 2008
Body Type Coupe Sedan
Engine Position Front Front
Engine Size 5935 cc 1995 cc
Engine Cylinders 12 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 0 HP 161 HP
Torque 542 Nm 330 Nm
Torque RPM 5000 RPM 2000 RPM
Engine Bore Size 89 mm 84 mm
Engine Stroke Size 79.5 mm 90 mm
Engine Compression Ratio 10.3:1 17.0:1
Fuel Type Gasoline Diesel
Top Speed 265 km/hour 221 km/hour
Acceleration 0-100mph 5.4 seconds 8.9 seconds
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1860 kg 1490 kg
Vehicle Length 4720 mm 4870 mm
Vehicle Height 1270 mm 1470 mm
Wheelbase Size 2600 mm 2770 mm
Fuel Consumption Overall 18.7 L/100km 5.7 L/100km
Fuel Tank Capacity 81 L 60 L