2008 Audi A3 vs. 1960 Toyota Crown

To start off, 2008 Audi A3 is newer by 48 year(s). Which means there will be less support and parts availability for 1960 Toyota Crown. In addition, the cost of maintenance, including insurance, on 1960 Toyota Crown would be higher. At 1,984 cc (4 cylinders), 2008 Audi A3 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Audi A3 weights approximately 28 kg more than 1960 Toyota Crown.

Because 1960 Toyota Crown is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1960 Toyota Crown. However, in wet, icy, snow, or gravel driving conditions, 2008 Audi A3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Audi A3 (200 Nm @ 3500 RPM) has 86 more torque (in Nm) than 1960 Toyota Crown. (114 Nm @ 3000 RPM). This means 2008 Audi A3 will have an easier job in driving up hills or pulling heavy equipment than 1960 Toyota Crown.

Compare all specifications:

2008 Audi A3 1960 Toyota Crown
Make Audi Toyota
Model A3 Crown
Year Released 2008 1960
Engine Position Front Front
Engine Size 1984 cc 1453 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 0 HP 55 HP
Torque 200 Nm 114 Nm
Torque RPM 3500 RPM 3000 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 3 doors 5 doors
Vehicle Weight 1278 kg 1250 kg
Vehicle Length 4210 mm 4370 mm
Vehicle Width 1770 mm 1700 mm
Vehicle Height 1430 mm 1550 mm
Wheelbase Size 2580 mm 2540 mm
Fuel Tank Capacity 55 L 75 L