2008 Audi A3 vs. 1972 Lancia 2000
To start off, 2008 Audi A3 is newer by 36 year(s). Which means there will be less support and parts availability for 1972 Lancia 2000. In addition, the cost of maintenance, including insurance, on 1972 Lancia 2000 would be higher. At 1,995 cc (4 cylinders), 1972 Lancia 2000 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1972 Lancia 2000 weights approximately 75 kg more than 2008 Audi A3.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, both vehicles can yield 170 Nm of torque. So under normal driving conditions, the ability to climb up hills and pull heavy equipment should be relatively similar for both vehicles. 2008 Audi A3 has automatic transmission and 1972 Lancia 2000 has manual transmission. 1972 Lancia 2000 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Audi A3 will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Audi A3 | 1972 Lancia 2000 | |
Make | Audi | Lancia |
Model | A3 | 2000 |
Year Released | 2008 | 1972 |
Engine Position | Front | Front |
Engine Size | 1781 cc | 1995 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 0 HP | 116 HP |
Torque | 170 Nm | 170 Nm |
Torque RPM | 4200 RPM | 3500 RPM |
Engine Compression Ratio | 10.3:1 | 8.9:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 1160 kg | 1235 kg |
Vehicle Length | 4180 mm | 4630 mm |
Vehicle Height | 1370 mm | 1470 mm |
Wheelbase Size | 2520 mm | 2660 mm |