2008 Audi A3 vs. 1992 Donkervoort D8
To start off, 2008 Audi A3 is newer by 16 year(s). Which means there will be less support and parts availability for 1992 Donkervoort D8. In addition, the cost of maintenance, including insurance, on 1992 Donkervoort D8 would be higher. At 1,994 cc (4 cylinders), 1992 Donkervoort D8 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Audi A3 weights approximately 525 kg more than 1992 Donkervoort D8.
Because 1992 Donkervoort D8 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1992 Donkervoort D8. However, in wet, icy, snow, or gravel driving conditions, 2008 Audi A3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Donkervoort D8 (291 Nm @ 3500 RPM) has 81 more torque (in Nm) than 2008 Audi A3. (210 Nm @ 1750 RPM). This means 1992 Donkervoort D8 will have an easier job in driving up hills or pulling heavy equipment than 2008 Audi A3.
Compare all specifications:
| 2008 Audi A3 | 1992 Donkervoort D8 | |
| Make | Audi | Donkervoort |
| Model | A3 | D8 |
| Year Released | 2008 | 1992 |
| Engine Position | Front | Front |
| Engine Size | 1781 cc | 1994 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 5 valves | 4 valves |
| Horse Power | 0 HP | 212 HP |
| Torque | 210 Nm | 291 Nm |
| Torque RPM | 1750 RPM | 3500 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Manual |
| Vehicle Weight | 1175 kg | 650 kg |
| Vehicle Length | 4180 mm | 3420 mm |
| Vehicle Height | 1370 mm | 1110 mm |
| Wheelbase Size | 2520 mm | 2310 mm |
