2008 Audi A3 vs. 1993 Toyota MR2

To start off, 2008 Audi A3 is newer by 15 year(s). Which means there will be less support and parts availability for 1993 Toyota MR2. In addition, the cost of maintenance, including insurance, on 1993 Toyota MR2 would be higher. At 1,997 cc (4 cylinders), 1993 Toyota MR2 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1993 Toyota MR2 weights approximately 451 kg more than 2008 Audi A3.

Because 1993 Toyota MR2 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1993 Toyota MR2. However, in wet, icy, snow, or gravel driving conditions, 2008 Audi A3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 Toyota MR2 (304 Nm @ 4000 RPM) has 134 more torque (in Nm) than 2008 Audi A3. (170 Nm @ 4200 RPM). This means 1993 Toyota MR2 will have an easier job in driving up hills or pulling heavy equipment than 2008 Audi A3.

Compare all specifications:

2008 Audi A3 1993 Toyota MR2
Make Audi Toyota
Model A3 MR2
Year Released 2008 1993
Body Type Hatchback Convertible
Engine Position Front Middle
Engine Size 1781 cc 1997 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 5 valves 4 valves
Horse Power 0 HP 241 HP
Torque 170 Nm 304 Nm
Torque RPM 4200 RPM 4000 RPM
Engine Bore Size 81 mm 86 mm
Engine Stroke Size 86.4 mm 86 mm
Drive Type Front Rear
Transmission Type Manual Manual
Number of Seats 5 seats 2 seats
Number of Doors 3 doors 2 doors
Vehicle Weight 1164 kg 1615 kg
Vehicle Length 4180 mm 4150 mm
Vehicle Height 1370 mm 1250 mm
Wheelbase Size 2520 mm 2470 mm
Fuel Tank Capacity 55 L 55 L