2008 Audi A4 vs. 2010 Zenvo ST1

To start off, 2010 Zenvo ST1 is newer by 2 year(s). Which means there will be less support and parts availability for 2008 Audi A4. In addition, the cost of maintenance, including insurance, on 2008 Audi A4 would be higher. At 7,000 cc (8 cylinders), 2010 Zenvo ST1 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Audi A4 weights approximately 214 kg more than 2010 Zenvo ST1.

Because 2008 Audi A4 is four wheel drive (4WD), it will have significant more traction and grip than 2010 Zenvo ST1. In wet, icy, snow, or gravel driving conditions, 2008 Audi A4 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Zenvo ST1 (1,430 Nm @ 4500 RPM) has 1059 more torque (in Nm) than 2008 Audi A4. (371 Nm @ 1500 RPM). This means 2010 Zenvo ST1 will have an easier job in driving up hills or pulling heavy equipment than 2008 Audi A4. 2008 Audi A4 has automatic transmission and 2010 Zenvo ST1 has manual transmission. 2010 Zenvo ST1 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Audi A4 will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Audi A4 2010 Zenvo ST1
Make Audi Zenvo
Model A4 ST1
Year Released 2008 2010
Body Type Sedan Coupe
Engine Position Front Middle
Engine Size 2496 cc 7000 cc
Horse Power 0 HP 1104 HP
Torque 371 Nm 1430 Nm
Torque RPM 1500 RPM 4500 RPM
Fuel Type Diesel Gasoline
Top Speed 225 km/hour 375 km/hour
Acceleration 0-100mph 8.6 seconds 3 seconds
Drive Type 4WD Rear
Transmission Type Automatic Manual
Number of Seats 5 seats 2 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1590 kg 1376 kg
Vehicle Length 4180 mm 4665 mm
Vehicle Height 1370 mm 1198 mm
Wheelbase Size 2660 mm 3055 mm