2008 Audi A6 3.0 Quattro vs. 2008 Audi A6 2.0 TDi

To start off, both 2008 Audi A6 3.0 Quattro and 2008 Audi A6 2.0 TDi were released in the same year (2008). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 2,975 cc, 2008 Audi A6 3.0 Quattro is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Audi A6 3.0 Quattro weights approximately 260 kg more than 2008 Audi A6 2.0 TDi.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Audi A6 2.0 TDi (320 Nm @ 1750 RPM) has 20 more torque (in Nm) than 2008 Audi A6 3.0 Quattro. (300 Nm @ 3200 RPM). This means 2008 Audi A6 2.0 TDi will have an easier job in driving up hills or pulling heavy equipment than 2008 Audi A6 3.0 Quattro.

Compare all specifications:

2008 Audi A6 3.0 Quattro 2008 Audi A6 2.0 TDi
Make Audi Audi
Model A6 A6
Year Released 2008 2008
Body Type Sedan Sedan
Engine Position Front Front
Engine Size 2975 cc 1967 cc
Valves per Cylinder 5 valves 4 valves
Horse Power 0 HP 138 HP
Torque 300 Nm 320 Nm
Torque RPM 3200 RPM 1750 RPM
Engine Bore Size 82.5 mm 81 mm
Engine Stroke Size 92.8 mm 95.5 mm
Engine Compression Ratio 10.5:1 18.0:1
Fuel Type Gasoline Diesel
Top Speed 241 km/hour 227 km/hour
Acceleration 0-100mph 7.7 seconds 8.4 seconds
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1535 kg 1275 kg
Vehicle Length 4580 mm 4800 mm
Vehicle Height 1400 mm 1460 mm
Wheelbase Size 2770 mm 2770 mm
Fuel Consumption Overall 9.7 L/100km 9.9 L/100km
Fuel Tank Capacity 70 L 70 L