2008 Audi A6 vs. 1956 Chevrolet Bel Air

To start off, 2008 Audi A6 is newer by 52 year(s). Which means there will be less support and parts availability for 1956 Chevrolet Bel Air. In addition, the cost of maintenance, including insurance, on 1956 Chevrolet Bel Air would be higher. At 3,869 cc (6 cylinders), 1956 Chevrolet Bel Air is equipped with a bigger engine. In terms of performance, 2008 Audi A6 (231 HP @ 4000 RPM) has 83 more horse power than 1956 Chevrolet Bel Air. (148 HP @ 4200 RPM). In normal driving conditions, 2008 Audi A6 should accelerate faster than 1956 Chevrolet Bel Air.

Because 2008 Audi A6 is four wheel drive (4WD), it will have significant more traction and grip than 1956 Chevrolet Bel Air. In wet, icy, snow, or gravel driving conditions, 2008 Audi A6 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Audi A6 (450 Nm @ 1400 RPM) has 172 more torque (in Nm) than 1956 Chevrolet Bel Air. (278 Nm @ 2200 RPM). This means 2008 Audi A6 will have an easier job in driving up hills or pulling heavy equipment than 1956 Chevrolet Bel Air.

Compare all specifications:

2008 Audi A6 1956 Chevrolet Bel Air
Make Audi Chevrolet
Model A6 Bel Air
Year Released 2008 1956
Engine Position Front Front
Engine Size 2967 cc 3869 cc
Valves per Cylinder 4 valves 2 valves
Horse Power 231 HP 148 HP
Engine RPM 4000 RPM 4200 RPM
Torque 450 Nm 278 Nm
Torque RPM 1400 RPM 2200 RPM
Engine Bore Size 83 mm 90.5 mm
Engine Stroke Size 91.4 mm 100 mm
Engine Compression Ratio 17.0:1 8.3:1
Fuel Type Diesel Gasoline
Drive Type 4WD Rear
Number of Seats 5 seats 5 seats
Number of Doors 5 doors 5 doors
Vehicle Length 4940 mm 4980 mm
Vehicle Width 1860 mm 1980 mm
Vehicle Height 1470 mm 1690 mm
Wheelbase Size 2850 mm 2930 mm