2008 Audi A6 vs. 1992 Beijing BJ 212

To start off, 2008 Audi A6 is newer by 16 year(s). Which means there will be less support and parts availability for 1992 Beijing BJ 212. In addition, the cost of maintenance, including insurance, on 1992 Beijing BJ 212 would be higher. At 2,976 cc (6 cylinders), 2008 Audi A6 is equipped with a bigger engine. In terms of performance, 2008 Audi A6 (217 HP @ 6300 RPM) has 130 more horse power than 1992 Beijing BJ 212. (87 HP @ 4250 RPM). In normal driving conditions, 2008 Audi A6 should accelerate faster than 1992 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 2008 Audi A6 weights approximately 5 kg more than 1992 Beijing BJ 212. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1992 Beijing BJ 212 is four wheel drive (4WD), it will have significant more traction and grip than 2008 Audi A6. In wet, icy, snow, or gravel driving conditions, 1992 Beijing BJ 212 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Audi A6 (300 Nm @ 3200 RPM) has 119 more torque (in Nm) than 1992 Beijing BJ 212. (181 Nm @ 2000 RPM). This means 2008 Audi A6 will have an easier job in driving up hills or pulling heavy equipment than 1992 Beijing BJ 212.

Compare all specifications:

2008 Audi A6 1992 Beijing BJ 212
Make Audi Beijing
Model A6 BJ 212
Year Released 2008 1992
Engine Size 2976 cc 2068 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type V in-line
Horse Power 217 HP 87 HP
Engine RPM 6300 RPM 4250 RPM
Torque 300 Nm 181 Nm
Torque RPM 3200 RPM 2000 RPM
Fuel Type Gasoline - Premium Diesel
Drive Type Front 4WD
Transmission Type Manual Manual
Vehicle Weight 1535 kg 1530 kg
Vehicle Length 4800 mm 3910 mm
Vehicle Width 1820 mm 1760 mm
Vehicle Height 1460 mm 1880 mm
Wheelbase Size 2770 mm 2310 mm