2008 Audi A6 vs. 1992 BMW 332
To start off, 2008 Audi A6 is newer by 16 year(s). Which means there will be less support and parts availability for 1992 BMW 332. In addition, the cost of maintenance, including insurance, on 1992 BMW 332 would be higher. At 3,152 cc (6 cylinders), 1992 BMW 332 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Audi A6 weights approximately 260 kg more than 1992 BMW 332.
Because 2008 Audi A6 is four wheel drive (4WD), it will have significant more traction and grip than 1992 BMW 332. In wet, icy, snow, or gravel driving conditions, 2008 Audi A6 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, both vehicles can yield 350 Nm of torque. So under normal driving conditions, the ability to climb up hills and pull heavy equipment should be relatively similar for both vehicles. 2008 Audi A6 has automatic transmission and 1992 BMW 332 has manual transmission. 1992 BMW 332 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Audi A6 will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Audi A6 | 1992 BMW 332 | |
Make | Audi | BMW |
Model | A6 | 332 |
Year Released | 2008 | 1992 |
Engine Position | Front | Front |
Engine Size | 2671 cc | 3152 cc |
Valves per Cylinder | 5 valves | 4 valves |
Horse Power | 0 HP | 317 HP |
Torque | 350 Nm | 350 Nm |
Torque RPM | 1800 RPM | 3250 RPM |
Engine Compression Ratio | 9.3:1 | 10.5:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 4 seats |
Vehicle Weight | 1660 kg | 1400 kg |
Vehicle Length | 4820 mm | 4440 mm |
Vehicle Width | 1860 mm | 1710 mm |
Vehicle Height | 1470 mm | 1400 mm |
Wheelbase Size | 2770 mm | 2710 mm |