2008 Audi A6 vs. 1998 Beijing BJ 2020

To start off, 2008 Audi A6 is newer by 10 year(s). Which means there will be less support and parts availability for 1998 Beijing BJ 2020. In addition, the cost of maintenance, including insurance, on 1998 Beijing BJ 2020 would be higher. At 2,965 cc (6 cylinders), 2008 Audi A6 is equipped with a bigger engine. In terms of performance, 2008 Audi A6 (230 HP @ 4000 RPM) has 147 more horse power than 1998 Beijing BJ 2020. (83 HP @ 3800 RPM). In normal driving conditions, 2008 Audi A6 should accelerate faster than 1998 Beijing BJ 2020. With that said, vehicle weight also plays an important factor in acceleration. 2008 Audi A6 weights approximately 270 kg more than 1998 Beijing BJ 2020. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Audi A6 (450 Nm @ 1400 RPM) has 277 more torque (in Nm) than 1998 Beijing BJ 2020. (173 Nm @ 2200 RPM). This means 2008 Audi A6 will have an easier job in driving up hills or pulling heavy equipment than 1998 Beijing BJ 2020.

Compare all specifications:

2008 Audi A6 1998 Beijing BJ 2020
Make Audi Beijing
Model A6 BJ 2020
Year Released 2008 1998
Engine Size 2965 cc 2444 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type V in-line
Horse Power 230 HP 83 HP
Engine RPM 4000 RPM 3800 RPM
Torque 450 Nm 173 Nm
Torque RPM 1400 RPM 2200 RPM
Fuel Type Diesel Gasoline
Drive Type 4WD 4WD
Transmission Type Manual Manual
Vehicle Weight 1820 kg 1550 kg
Vehicle Length 4920 mm 3870 mm
Vehicle Width 1860 mm 1760 mm
Vehicle Height 1470 mm 1880 mm
Wheelbase Size 2850 mm 2310 mm