2008 Audi A6 vs. 2011 BMW 120

To start off, 2011 BMW 120 is newer by 3 year(s). Which means there will be less support and parts availability for 2008 Audi A6. In addition, the cost of maintenance, including insurance, on 2008 Audi A6 would be higher. At 2,393 cc, 2008 Audi A6 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Audi A6 weights approximately 60 kg more than 2011 BMW 120.

Because 2008 Audi A6 is four wheel drive (4WD), it will have significant more traction and grip than 2011 BMW 120. In wet, icy, snow, or gravel driving conditions, 2008 Audi A6 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Audi A6 (230 Nm @ 3200 RPM) has 20 more torque (in Nm) than 2011 BMW 120. (210 Nm @ 4250 RPM). This means 2008 Audi A6 will have an easier job in driving up hills or pulling heavy equipment than 2011 BMW 120.

Compare all specifications:

2008 Audi A6 2011 BMW 120
Make Audi BMW
Model A6 120
Year Released 2008 2011
Engine Position Front Front
Engine Size 2393 cc 1995 cc
Valves per Cylinder 5 valves 4 valves
Horse Power 0 HP 168 HP
Torque 230 Nm 210 Nm
Torque RPM 3200 RPM 4250 RPM
Engine Bore Size 81 mm 84.1 mm
Engine Stroke Size 77.4 mm 90 mm
Engine Compression Ratio 10.5:1 12.0:1
Fuel Type Gasoline Gasoline
Acceleration 0-100mph 9.4 seconds 9 seconds
Drive Type 4WD Rear
Transmission Type Automatic Automatic
Number of Seats 5 seats 4 seats
Number of Doors 5 doors 2 doors
Vehicle Weight 1585 kg 1525 kg
Vehicle Length 4800 mm 4370 mm
Vehicle Width 1820 mm 1910 mm
Vehicle Height 1460 mm 1760 mm
Wheelbase Size 2770 mm 2670 mm
Fuel Consumption Overall 10.8 L/100km 6.8 L/100km
Fuel Tank Capacity 70 L 53 L