2008 Audi S6 vs. 1986 Holden Gemini

To start off, 2008 Audi S6 is newer by 22 year(s). Which means there will be less support and parts availability for 1986 Holden Gemini. In addition, the cost of maintenance, including insurance, on 1986 Holden Gemini would be higher. At 5,202 cc (10 cylinders), 2008 Audi S6 is equipped with a bigger engine. In terms of performance, 2008 Audi S6 (429 HP @ 6800 RPM) has 363 more horse power than 1986 Holden Gemini. (66 HP @ 5400 RPM). In normal driving conditions, 2008 Audi S6 should accelerate faster than 1986 Holden Gemini. With that said, vehicle weight also plays an important factor in acceleration. 2008 Audi S6 weights approximately 950 kg more than 1986 Holden Gemini. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 Audi S6 is four wheel drive (4WD), it will have significant more traction and grip than 1986 Holden Gemini. In wet, icy, snow, or gravel driving conditions, 2008 Audi S6 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Audi S6 (540 Nm @ 3000 RPM) has 430 more torque (in Nm) than 1986 Holden Gemini. (110 Nm @ 3200 RPM). This means 2008 Audi S6 will have an easier job in driving up hills or pulling heavy equipment than 1986 Holden Gemini.

Compare all specifications:

2008 Audi S6 1986 Holden Gemini
Make Audi Holden
Model S6 Gemini
Year Released 2008 1986
Engine Position Front Front
Engine Size 5202 cc 1584 cc
Engine Cylinders 10 cylinders 4 cylinders
Engine Type V in-line
Horse Power 429 HP 66 HP
Engine RPM 6800 RPM 5400 RPM
Torque 540 Nm 110 Nm
Torque RPM 3000 RPM 3200 RPM
Fuel Type Gasoline Gasoline
Drive Type 4WD Rear
Transmission Type Automatic Automatic
Vehicle Weight 1910 kg 960 kg
Vehicle Length 4920 mm 4250 mm
Vehicle Width 1870 mm 1580 mm
Vehicle Height 1460 mm 1340 mm
Wheelbase Size 2850 mm 2410 mm