2008 Bentley Arnage vs. 2010 Chrysler PT Cruiser
To start off, 2010 Chrysler PT Cruiser is newer by 2 year(s). Which means there will be less support and parts availability for 2008 Bentley Arnage. In addition, the cost of maintenance, including insurance, on 2008 Bentley Arnage would be higher. At 6,750 cc (8 cylinders), 2008 Bentley Arnage is equipped with a bigger engine. In terms of performance, 2008 Bentley Arnage (450 HP @ 4100 RPM) has 302 more horse power than 2010 Chrysler PT Cruiser. (148 HP @ 4000 RPM). In normal driving conditions, 2008 Bentley Arnage should accelerate faster than 2010 Chrysler PT Cruiser. With that said, vehicle weight also plays an important factor in acceleration. 2008 Bentley Arnage weights approximately 1027 kg more than 2010 Chrysler PT Cruiser. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2008 Bentley Arnage is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 Bentley Arnage. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler PT Cruiser, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Bentley Arnage (875 Nm @ 3250 RPM) has 575 more torque (in Nm) than 2010 Chrysler PT Cruiser. (300 Nm @ 1600 RPM). This means 2008 Bentley Arnage will have an easier job in driving up hills or pulling heavy equipment than 2010 Chrysler PT Cruiser. 2008 Bentley Arnage has automatic transmission and 2010 Chrysler PT Cruiser has manual transmission. 2010 Chrysler PT Cruiser will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Bentley Arnage will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Bentley Arnage | 2010 Chrysler PT Cruiser | |
Make | Bentley | Chrysler |
Model | Arnage | PT Cruiser |
Year Released | 2008 | 2010 |
Body Type | Sedan | Hatchback |
Engine Position | Front | Front |
Engine Size | 6750 cc | 2146 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 450 HP | 148 HP |
Engine RPM | 4100 RPM | 4000 RPM |
Torque | 875 Nm | 300 Nm |
Torque RPM | 3250 RPM | 1600 RPM |
Engine Bore Size | 104.3 mm | 88 mm |
Engine Stroke Size | 99.1 mm | 88.3 mm |
Engine Compression Ratio | 7.8:1 | 18.0:1 |
Fuel Type | Gasoline - Premium | Diesel |
Acceleration 0-100mph | 5.8 seconds | 10.8 seconds |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 5 doors |
Vehicle Weight | 2585 kg | 1558 kg |
Vehicle Length | 5400 mm | 4290 mm |
Vehicle Width | 1910 mm | 1750 mm |
Vehicle Height | 1520 mm | 1670 mm |
Wheelbase Size | 3120 mm | 2620 mm |
Fuel Consumption Overall | 19.5 L/100km | 6.7 L/100km |
Fuel Tank Capacity | 96 L | 57 L |