2008 BMW 116 vs. 2008 Ford Bantam

To start off, both 2008 BMW 116 and 2008 Ford Bantam were released in the same year (2008). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 1,596 cc (4 cylinders), 2008 BMW 116 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 BMW 116 weights approximately 320 kg more than 2008 Ford Bantam.

Because 2008 BMW 116 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 BMW 116. However, in wet, icy, snow, or gravel driving conditions, 2008 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 BMW 116 (150 Nm @ 4300 RPM) has 40 more torque (in Nm) than 2008 Ford Bantam. (110 Nm @ 3000 RPM). This means 2008 BMW 116 will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam.

Compare all specifications:

2008 BMW 116 2008 Ford Bantam
Make BMW Ford
Model 116 Bantam
Year Released 2008 2008
Engine Position Front Front
Engine Size 1596 cc 1297 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 113 HP 0 HP
Torque 150 Nm 110 Nm
Torque RPM 4300 RPM 3000 RPM
Engine Compression Ratio 10.2:1 10.2:1
Fuel Type Gasoline Gasoline
Top Speed 200 km/hour 158 km/hour
Acceleration 0-100mph 11.1 seconds 12.9 seconds
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 5 seats 2 seats
Number of Doors 5 doors 2 doors
Vehicle Weight 1280 kg 960 kg
Vehicle Length 4250 mm 4280 mm
Vehicle Width 1760 mm 1470 mm
Vehicle Height 1440 mm 1640 mm
Wheelbase Size 2670 mm 2670 mm
Fuel Consumption Overall 7.5 L/100km 8.8 L/100km
Fuel Tank Capacity 50 L 54 L