2008 BMW 120 vs. 1996 Peugeot 605

To start off, 2008 BMW 120 is newer by 12 year(s). Which means there will be less support and parts availability for 1996 Peugeot 605. In addition, the cost of maintenance, including insurance, on 1996 Peugeot 605 would be higher. At 1,997 cc (4 cylinders), 1996 Peugeot 605 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1996 Peugeot 605 weights approximately 105 kg more than 2008 BMW 120.

Because 2008 BMW 120 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 BMW 120. However, in wet, icy, snow, or gravel driving conditions, 1996 Peugeot 605, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 BMW 120 (201 Nm @ 3600 RPM) has 22 more torque (in Nm) than 1996 Peugeot 605. (179 Nm @ 4200 RPM). This means 2008 BMW 120 will have an easier job in driving up hills or pulling heavy equipment than 1996 Peugeot 605.

Compare all specifications:

2008 BMW 120 1996 Peugeot 605
Make BMW Peugeot
Model 120 605
Year Released 2008 1996
Engine Position Front Front
Engine Size 1995 cc 1997 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 0 HP 135 HP
Torque 201 Nm 179 Nm
Torque RPM 3600 RPM 4200 RPM
Engine Bore Size 84 mm 86 mm
Engine Stroke Size 90 mm 86 mm
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Vehicle Weight 1335 kg 1440 kg
Vehicle Length 4620 mm 4770 mm
Vehicle Width 1440 mm 1800 mm
Vehicle Height 1760 mm 1420 mm
Wheelbase Size 2670 mm 2810 mm