2008 BMW 120 vs. 2010 Saab 05-Sep

To start off, 2010 Saab 05-Sep is newer by 2 year(s). Which means there will be less support and parts availability for 2008 BMW 120. In addition, the cost of maintenance, including insurance, on 2008 BMW 120 would be higher. At 2,290 cc (4 cylinders), 2010 Saab 05-Sep is equipped with a bigger engine. In terms of performance, 2010 Saab 05-Sep (260 HP @ 5300 RPM) has 99 more horse power than 2008 BMW 120. (161 HP @ 4000 RPM) In normal driving conditions, 2010 Saab 05-Sep should accelerate faster than 2008 BMW 120. With that said, vehicle weight also plays an important factor in acceleration. 2010 Saab 05-Sep weights approximately 234 kg more than 2008 BMW 120. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 BMW 120 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 BMW 120. However, in wet, icy, snow, or gravel driving conditions, 2010 Saab 05-Sep, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Saab 05-Sep (350 Nm @ 1900 RPM) has 20 more torque (in Nm) than 2008 BMW 120. (330 Nm @ 2000 RPM). This means 2010 Saab 05-Sep will have an easier job in driving up hills or pulling heavy equipment than 2008 BMW 120. 2010 Saab 05-Sep has automatic transmission and 2008 BMW 120 has manual transmission. 2008 BMW 120 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Saab 05-Sep will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 BMW 120 2010 Saab 05-Sep
Make BMW Saab
Model 120 05-Sep
Year Released 2008 2010
Engine Position Front Front
Engine Size 1995 cc 2290 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 161 HP 260 HP
Engine RPM 4000 RPM 5300 RPM
Torque 330 Nm 350 Nm
Torque RPM 2000 RPM 1900 RPM
Engine Bore Size 84 mm 90 mm
Engine Stroke Size 90 mm 90 mm
Engine Compression Ratio 17.0:1 10.3:1
Fuel Type Diesel Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 5 doors 4 doors
Vehicle Weight 1344 kg 1578 kg
Vehicle Length 4230 mm 4840 mm
Vehicle Width 1440 mm 1800 mm
Vehicle Height 1760 mm 1460 mm
Wheelbase Size 2670 mm 2710 mm
Fuel Consumption Overall 8.9 L/100km 11.8 L/100km
Fuel Tank Capacity 50 L 70 L